1, "Look" appearance.
Good color. The PP-R water pipe produced by Shanghai gongjinniu has soft, uniform and uniform color without mottled color. PP-R pipes are mainly white, gray, green and yellow. Consumers often think that white is good. In fact, the color is not the standard to judge the quality. In fact, the quality of PP-R pipes has nothing to do with the color of PP-R pipes. Plastic particles are mainly white and transparent (there are also other colors added with color masterbatch). As long as the color masterbatch is added, any color can be produced, and the color masterbatch will not be decomposed and will not change the quality of pp-r. therefore, it doesn't matter what color the water pipe is. According to the regulations, PP-R water pipe should have good light closing performance. In this regard, gray or other light tight properties will be better. However, such advantages only exist in the open pipe installation and pipe well. All the water pipes of home decoration are buried, so there is no saying that gray is better than other colors
PPR 수도관은 완전히 불투명하고 유사 PP{0}}R 파이프는 약간 투명하거나 반투명합니다. 일반적으로 백색 제품은 순수한 PP{1}}원료로만 생산할 수 있습니다. 예를 들어, 재활용 재료, 폐기물 및 모서리 재료를 추가하여 생산된 제품의 색상은 부드럽거나 균일하지 않은 반면 색상 마스터 배치로 처리된 다른 색상 제품의 색상은 재활용 재료, 폐기물 및 모서리 재료를 추가해도 영향을 받지 않습니다. 이것이 품질에 관심을 기울이는 많은 제조업체가 주로 가정 장식 소매에 초점을 맞추고 제품이 주로 흰색인 이유입니다. 제품의 내부 및 외부 표면은 매끄럽고 평평해야 하며 기포, 명백한 함몰, 홈, 불순물 및 기타 결함이 없어야 합니다.
2, 터치 질감.
좋은 PP{0}}R 파이프는 100% PP{2}}R 원료(첨가물 없음)입니다. 질감은 순수하고 표면은 매끄럽고 촉감은 부드럽습니다. 유사 PP-R 파이프의 느낌은 부드럽습니다. 일반적으로 거친 입자는 불순물과 혼합되기 쉽습니다.
3, "Smell" the smell.
PP{0}}R 파이프의 주재료는 폴리프로필렌입니다. 좋은 파이프는 냄새가 없고 나쁜 파이프는 이상한 냄새가 난다. 폴리프로필렌이 아닌 폴리에틸렌과 혼합될 가능성이 높습니다.
4, "Pinch" hardness.
PP{0}}R 튜브는 상당한 경도를 가지고 있습니다. 쉽게 꼬이고 변형될 수 있습니다. 확실히 PP{1}}R 튜브가 아닙니다.
5, "Measure" wall thickness,
또한 버니어 캘리퍼스를 사용하여 파이프 벽 두께가 표준을 충족하고 균일한지 여부를 측정할 수 있습니다. 일반적으로 좋은 파이프는 국가 표준에 따라 엄격하게 생산되지만 이 방법을 사용하려면 PP{0}}R 파이프의 국가 표준에 대한 어느 정도 이해가 필요합니다.
6, "Listen" to the sound.
PP{0}}R관의 착지음은 둔하고 유사 PP{1}}R관의 착지음은 선명합니다.
7, "Smash" elasticity.
A good PP-R pipe has good "resilience" and is easy to break. Naturally, it is not a good PP-R pipe, but the best PP-R pipe can be broken when the temperature is lower than 10 degrees. However, strong hardness does not mean good elasticity. Some manufacturers improve the hardness by adding too many impurities such as calcium carbonate, which can not be broken and is easy to crack after long use; (due to the cold brittleness of PP-R raw materials, the properties are different in several temperature ranges: 10, - 5, - 23)
8, "Burn" smoke smell.
The PP-R tube mixed with recycled plastics and other impurities in the raw materials will emit black smoke and pungent smell. Good materials will not emit black smoke and smell after combustion, and the molten liquid is still very clean after combustion. (you can also "pull" to see its "length")
9, "Melting".
용접 중 PP{0}}R 파이프라인의 정상적인 용접 온도는 260{2}}290도 범위이며 이 온도 범위 내에서 용접하는 동안 용접 품질이 잘 입증됩니다. 제품이 정상적인 용접 매개변수에서 용접 중 용접 다이 헤드에 쉽게 들어갈 수 있고 용접 축적 종양이 액체에 가까우면 제품이 정품 PP{4}}R 원료로 생산되지 않았음을 나타냅니다. 동시에 시간, 용접 축적 종양이 빠르게 냉각되고 경화될 수 있는 경우(일반적으로 10초 이내), 제품이 정품 PP{5}}R 원료로 생산되지 않았음을 나타낼 수도 있습니다. PP-R의 특성 중 하나는 단열 효과가 좋고 냉각 속도가 자연스럽게 느려지기 때문입니다. 파이프 내경이 변형되었는지, 파이프 피팅이 브러시 처리되었는지 확인하십시오. 좋은 PP-R 파이프는 솔질을 할 수 없고 내경이 쉽게 변형되지 않습니다.
10, "Check".
테스트 도구를 사용하여 제품의 장점과 단점을 감지하고 효과적으로 구별합니다. 파이프 노화 저항 테스트(링 응력이 1.9mpa이고 테스트 온도가 110도일 때 876{6}}시간 동안 실패하지 않는 테스트), 파이프라인과 같은 몇 가지 중요한 테스트 요구 사항 데이터가 국가 표준에 지정되어 있습니다. 시스템 안정성 테스트(5000회 저온 및 고온 사이클) 및 내충격성 테스트. 따라서 사용자는 확인을 위해 위의 테스트 보고서를 제공하도록 제조업체 또는 비즈니스에 요청할 수 있습니다. 또한 국가 표준에는 파이프 및 피팅에 사용되는 원자재, 즉 용융 지수에 대한 중요한 요구 사항도 있음을 지적해야합니다. 국가 표준은 가공 전후 용융 지수의 변화 값이 30%를 초과해서는 안 된다고 요구하고 있으며, 산업계에서는 원료의 용융 지수가 0.5g/10min을 초과해서는 안 된다는 요구 사항도 있습니다.