Description

There are many pipe fittings connecting HDPE pipes. Here we introduce the HDPE Socket Fittings.This is a kind of plastic pipe fittings, which are made of polypropylene raw materials as well as Color Master Batch , which are then mixed and formed by mold plastic parts. It can play an excellent fastening effect under certain circumstances, which is smooth and complete inside and outside, and is not easy to slip under uniform force, which greatly improves work efficiency.However, attention should be paid to the size of the product when connecting the pipe and the pipe. Only the pipe and pipe of the corresponding size can fit perfectly, and the installation is better and faster.

Advantage

1. 100 percent pure new material, without adding regrind, calcium powder.

2. Each batch of products will be tested by water pressure, 100 percent resistant to 16 kilograms of water pressure.

3. High-hardness POM snap ring, tightly clamped on the pipe, will not slide and leak water.

4. With complete product style, color, size , produce fast.

5. The mold has been improved to make it easier to operate and install, and pressure-resistant materials are added to the water joints, which are not easy to burst.

PE Fitting (9)

Feature

1. No leakage

HDPE Socket Fittings body and end pipe are mainly connected by welding (hot-melt connection or electro-fusion connection), so the welding and wide connection of the whole body shell have high strength and excellent sealing performance. Compared with rubber ring joints or other mechanical joints, there is no danger of external leakage due to joint distortion.

2. Corrosion resistance

Polyethylene is an inert material, except for a few strong oxidants, it can withstand the erosion of a variety of chemical media. The soil corrosion resistance is very good, no electrochemical corrosion, no anti-corrosion layer is needed.

3. No maintenance or repair is required

The HDPE Socket Fittings wall is smooth, does not scale, has ultra-low friction resistance, and is an environmentally friendly product.

4. Convenient construction

The shell material of the HDPE Socket Fittings is PE itself, so it is extremely convenient to connect with the PE piping system, either hot-melt butt or electro-fusion connection; easy to open and close, and small operating torque.

5. High toughness

PE is a kind of high toughness material, its elongation at break generally exceeds 500 percent , it is very adaptable to the uneven settlement of the pipe foundation, and it is also a kind of pipe with excellent seismic performance.

6. Long lasting

The material can be used for more than 50 years, which is determined based on the long-term hydrostatic design basis value (HDB) of the circumferential tensile strength of polyethylene pipes, which has been confirmed by international standards.

PE Fitting (4)